Guide to Auto Detailing – How to Clean Your Car in 3 Easy Steps

In looking for the Perfect Guide to Auto Detailing I would first like to state that I do not want to take away from the capabilities of detailing machines. It is a very important part of owning a car, and many times more work than not done. However, there are a number of ways to vastly improve the amount of work involved in auto detailing. I will list a few below, but ultimately it is up to you to decide how much work you are willing to do.

The Perfect Guide to Auto Detailing instructs you on the tools that should be used for proper car cleaning. In addition, you will learn the proper procedures of washing your car using these tools. The tools mentioned are what can be found at any local car wash. If you have a car that rarely needs cleaning other than a wax treatment, these steps will save you time and money. However, if you car calls for daily deep cleaning, this guide to auto detailing will show you how to maximize your time and possibly save a little money as well.

Water is the most common element used in cleaning. However, it must be carefully controlled so as not to damage the paint or finish. The best way to test to see if water is good enough is to pour a glass of water onto the surface of your car, if it beads or seeps into the finish, it is not water capable of cleaning your car. You should always use a detergent or soap to wash your car, and you should never spray directly on to the car. Spray it on a paper towel, gently wipe the surface of the car, and if the water comes out clean, your car is clean. If the water comes out dirty, you need to clean it a bit more.

The next step to cleaning your car is to clean off the debris. There may be small pieces sticking to the exterior, such as road salt or brake dust. Try removing these with a toothbrush. If not removed, they will build up and cause dirt to build up on the paint.

After you have washed and cleaned the car, you should rinse it off under running water. Use a shop brush or a rag to remove any remaining water from the surface of the paint. Rinse it again under running water. This final rinse is important because any remaining residue that is left can potentially affect the finish of the paint. You do not want to risk having a paint finish that looks horrible on your car.

The next step is to apply the clear coat. This is a protective coating that will protect the paint from getting damaged. You should apply a coat around thirty minutes to one hour before you intend to paint. Let it dry thoroughly before applying the next coat.

The last step is to prime and paint your car. Priming will help protect your paint from scratches and bumps. It will also help make your paint adhere to your car body properly. Once you are done priming, you can paint. Make sure you use a paint brush that is made for the type of car you have and apply a couple of coats so that all the scratches and imperfections are taking care of.

You can learn more by downloading our free auto detailing guide. In just thirty minutes, you can download our detailed auto dissection guide. Inside you will discover the most powerful strategies to keep your car clean. No matter how dirty your vehicle may be, you can still take great car details and get the results you want. Why not check out our guide now?

Leave a Reply

Your email address will not be published. Required fields are marked *